Removing Dried Super Glue

ca glue remover

1. Peeling the Glue from the Surface

Using your fingers or nails, you can try to peel the glue off the surface. You may find the glue rolling back even without using an adhesive remover. In most smooth surfaces such as wood, stone or metal, the idea can work. But it is wise to test first to make sure it won’t damage the surface. If the spot clears, you are good to continue. If not, try the next step.

2. Soak the Surface

Try soaking the surface. Add soap to warm water, and then soak a piece of cloth to the mixture. Then lay the piece of cloth over the glue. You need to let it sit for a couple of hours before removing it. You can cover the cloth to keep it moist. Once the glue softens, try scraping away.

3. Using Nail Polish Remover

Another easy way to remove glue from a surface is using a nail polish remover. When you try pulling off the glue from a soft surface, you risk lifting the surface with it. Hence, subtlety is needed. Do not use a harsh nail polish remover as it can damage the metal or stone surface if you are not cautious. Start by dipping a piece of cotton wool or a cleaning rug into the nail polish remover, then use a toothbrush to scrape the surface. Then ensure that no one uses the brush to clean their teeth thereafter.

Rub the surface until you remove the glue completely. For a small area, you can use your finger. Stick a finger behind the piece of cloth and direct it in circular motions. If the stains are a bit large, use the rag to rub the surface. Later use silicone or rubber to lift the glue off. If you are lucky, the nail polish will be able to lift the glue edges so that you can slide a spatula under. Continue working until the glue is completely removed.

Then wash the area with warm water to clear the nail polish remover. For furniture surface, you can polish the surface with olive oil.

4. Using Lemon Juice

If you do not want the idea of nail polish remover or you would like a less corrosive solution, try lemon juice. By using a piece of cloth, apply lemon juice to the surface. You can also use a toothbrush to move around over the glue until it starts to lift. You can also try rubbing alcohol as well.

5. Using Mineral Oil

If the surface is not painted, mineral oil can work for you. Dip a piece of cloth into the oil, and rub it on the glue stains until it starts to lift. Then wash the mineral oil with warm water and polish it. It works well with unpainted wood.

6. Sanding

In some cases, sanding the surface might be the best option. Begin by placing a masking tape around the stain to protect other areas around it. Then sand the surface until it lifts. Later, restore the sanded part with paint, oil or varnish to its original finish.