Using CA Glue to Stabilize Wood

Stabilizing wood is an essential woodwork technique as it makes timber stronger and denser to reduce expansion and shrinkage. It’s also possible to rearrange wood grains during the stabilization process to get rid of timber defects. You can attain this feat by vacuuming; this involves soaking the wood in Danish oil. It's, however, a complex wood stabilizing process hence the reason why most woodworkers prefer wood casting – a simple procedure that involves the use of ca glue.

stabilize wood

More on Wood Casting

Timber with dry or open grain is more likely to warp, expand or shrink. Timber items that are made out of this kind of wood don’t subsequently bear the durability standards that most wood craftsmen wish to attain. Irrespective of the woodturning supplies used to give a piece of wood an attractive ambiance, wood stabilization is still an important aspect of the whole process because prepping oily and wet/green types of woods for exceptional timber-work calls for compact wood grains.

Compressing the wood grains together using a tube of ca glue is usually a good idea. However, you have to sand the wood’s surface first so that you don’t waste the cyanoacrylate adhesive, on unnecessary wood grains. The sanding process is best handled using a 400 grit paper as you clear any blanks within the grits until the wood gives out a white glaze. A dull whitish appearance means that you still need to deploy a series of woodturning supplies to obtain the desired look.

Applying the Ca Glue

One of the supplies that you need to apply the cyanoacrylate adhesive with is the ca applicator because it aids with precision. It also enables you to apply the ca glue from the bushings to mandrel – providing an instant bond that grants formidable wood stability. To apply the glue, get a paper towel and fold it into a rectangular shape.

As the lathe rotates, in slow motion, hold the cyanoacrylate glue bottle above the paper towel. Squeeze the bottle’s bottom end gently with a steady grip. The glue dries up instantly as it lands on the selected parts of the wood – giving it a smooth and compact look. Ca glue wood stabilizing process that requires multiple glue applications may take time to dry up. Make sure to use super glue accelerator to aid with quicker drying. Don’t add too much accelerator for this may lead to poor results.

Buff and Polish

No ca adhesive wood stabilizing process isn't complete without buffing and polishing. The woodturning supplies that you need at this stage include red rogue and white diamond compound. Note that it’s possible to improvise by deploying creative buffing and polishing materials if you don’t have the above supplies. It’s also significant to undertake the processes using the right principles. For example, the mandrel should be held at 45 degrees as the lathe runs in reverse. Use different buffing compound for each wheel to obtain beautiful high-gloss finish without blemish. Look up engaging online resources that can enable you to perfect the art of using ca glue to stabilize wood because its reliable and affordable at any scale.