Customer Service Center: 1-800-900-GLUE (4583)

Items 1 to 10 of 78 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Starbond superglue for Selenite

Monday, November 19, 2018 4:19:49 AM America/Los_Angeles

This write-up will cover the journey that Selenite takes from the Crystalline Phoenix LLC quarry that is located in New Mexico, through its stabilization process with Starbond Super Fast Thin CA Glue, and finally to its shipment to Australia. The selenite was mined from our quarry with an excavator and backhoe.

The selenite block weighs two ton and was strapped and shipped to New Mexico Travertine in Belen, NM, where it was cut into several slabs using a large belt saw.

Read More
Posted in News By Michael Earley

Beginner CA Glue Problems and Solutions Explained Here - Part I

Thursday, August 2, 2018 2:26:59 PM America/Los_Angeles

cyanoacrylate glue

Originally, CA glues were meant to be used in small amounts. Cyanoacrylate glues actually and perceivably perform better when less are applied. When less glue is used, the adhesive dries faster, allowing it to reach its full bonding strength sooner. Before blaming the adhesive, there are 3 instances when CA glues seem to have poor performance:

Read More
Posted in News By Joe Bond

CA Glue and Coffee Ground Filler

Thursday, June 21, 2018 3:48:44 AM America/Los_Angeles

Like many woodworkers, my interest in woodworking started in my teen years due to a passionate woodshop teach who inspired me to learn how to use tools and make things with my own two hands. Unfortunately what they don’t teach you in woodshop is perfection is allusive and rarely if ever achieved. I struggled for many years trying to make things perfect from the start of any project until I read some words of wisdom somewhere online, “A good craftsman isn’t someone who that doesn’t make mistakes. A good craftsman is someone who knows how to fix or make the most out of his mistakes.”

Read More
Posted in News By Michael Earley

How to Inlay Mother of Pearl With CA Glue

Thursday, June 21, 2018 3:28:18 AM America/Los_Angeles

In this article, I'm going to show you a couple ways to do some creative stuff with CA glues and also few tips for making your CA last longer. Let's get started.

Read More
Posted in News By Starbond

Woodturning Pocket Mirror With A CA Finish

Thursday, June 21, 2018 3:21:48 AM America/Los_Angeles

Today, I'm working on a piece of pocket mirror. I wanted to show you real quick how I do them. We're gonna put a CA finish on the back of it. I have here a piece of walnut which is about two inches thick. Depending on the size, you may pick based on the mirror size or adjust a little bit. I can get two or three out of it. Then we can epoxy it in into the little recess and we'll foot around and use the jaws to expand it to finish the outside of it.

Read More
Posted in News By Starbond

Inlay Padauk Wood Dust With CA Glue

Thursday, June 21, 2018 3:19:25 AM America/Los_Angeles

Today's product that I'll be showing you is the Starbond Super Fast Thin EM-02. One of the great benefits of Starbond CA glues is the ability to adapt with interesting neat little patterns.

Read More
Posted in News By Starbond

Woodturning CA Finish On The Lathe

Thursday, June 21, 2018 3:14:35 AM America/Los_Angeles

Today's product that I'll be showing you is the Starbond Super Fast Thin EM-02. You can use this glue for a neat little trick on making lathe applied finish.

Read More
Posted in News By Starbond

Superglue and Baking Soda Trick to Repair Plastic Popsicle Mold

Thursday, June 21, 2018 3:10:34 AM America/Los_Angeles

We have another neat little trick on using Starbond glues. Maybe you've seen this method before but it works with all CA glues. I have here a popsicle mold. I've got it fresh from the store and there was a hole right where the mold have been ejected the plastic.

Read More
Posted in News By Starbond

CA Glue Application for Pen Turning Beginners

Thursday, June 21, 2018 3:08:09 AM America/Los_Angeles

In this article, I'll show a way to glue pen tubes into your blanks. I have here a pair of figured white oak blanks and this includes using two types of Starbond Superglues - the EM-02 Super Fast Thin and the EM-150 Medium. So here's what you do:

Read More
Posted in News By Starbond

Stabilizing Wood with CA Before Resin Crown Casting

Thursday, June 21, 2018 1:19:59 AM America/Los_Angeles

There is another use that I do quite often with Starbond Superglue. I have here a pre-turned all wood bowl. It's almost finished and it needs one more thing. I'm gonna take this what I call a natural landscape - an effect that is created when the wood bowl is broken apart.

Read More
Posted in News By Starbond

Items 1 to 10 of 78 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5